Project - Hotel Industry & Shopping Malls

Air Handling Units

Our range of air handling units are available in double skin and single skin. These are widely used in pharmaceutic units, clean room,shopping mall, hospital, commercial center, call center, industrial ventilation, air cooling and other allied places. Some of the general specifications of our range are:


  •   Available type- Horizontal /vertical /ceiling suspended.
  •   Double/single skin/double decker.
  •   Capacity of 400 CFM to 50000 CFM.
  •   Static pressure range from 25 mm to 150 mm of Wg.
  •   MOC-Inner skin of.6 mm thick pre coated.
  •   Outer skin.of 6 MM thick GI plain.
  •   Panel thickness of 25 mm and 50 mm.
  •   Infill between panel-sandwich construction with CFC free PUF insulation.
  •   Frame work-Extruded aluminum profile with nylon fitting.
  •   Base frame -GSS Frame.
  •   Coil- 4 / 6 / 8 / 2 row copper tube with aluminum fins.
  •   Drain-Aluminum/SS/GI
  •   Motor-ABB/semens make 3 phase motor.
  •   Fan-Forward and backward fan imported fan.
  •   Filters-50 MM thick pre filter and 300mm fine and HEPA filter.

Air Washer

Our air washers are available in modular designs and made out of pre-fabricated tank and panels. These are widely used in textile mills, paper, tea garden and green house / poultry sheds. Our air washer systems provide solutions for various ventilation requirements for industrial & commercial establishments.


We offer standardized air washers in modular designs and constructed using pre-fabricated tank and panels. Our range of air washer are used to wash and humidify the air without the use of evaporator mats. Special humidifier discs turn through water constantly.


This method removes many impurities like dust, pollen and particle-bound odors from the air. The range of our air washers are equipped with an anti-microbial protection system which insures hygienically cleaned air through out.


  •   Available type- Horizontal /vertical /ceiling suspended.
  •   Double/single skin/double decker.
  •   Capacity of 400 CFM to 50000 CFM.
  •   Static pressure range from 25 mm to 150 mm of Wg.
  •   MOC-Inner skin of.6 mm thick pre coated.
  •   Outer skin.of 6 MM thick GI plain.
  •   Panel thickness of 25 mm and 50 mm.
  •   Infill between panel-sandwich construction with CFC free PUF insulation.
  •   Frame work-Extruded aluminum profile with nylon fitting.s
  •   Base frame -GSS Frame.
  •   Coil- 4 / 6 / 8 / 2 row copper tube with aluminum fins.
  •   Drain-Aluminum/SS/GI
  •   Motor-ABB/semens make 3 phase motor.
  •   Fan-Forward and backward fan imported fan.
  •   Filters-50 MM thick pre filter and 300mm fine and HEPA filter.

Wet Scrubber

Wet scrubbers are used as pollution control unit to minimize toxicity of the flue gas and other gases. For the wet scrubber, scrubbing liquid is used to eliminate pollutants. Dust particles are eliminated with liquid droplets. For various industrial applications, we offer different designs options to suit your need.


With advance fabrication facilities we offer total turnkey projects with cost-effective range. We use mild steel to manufacture wet scrubber unit. Our unit is also available with total FRP and PP material. We also provide customized design units with suitable material of construction for the wet scrubbers. We make use of the higher lining materials likes FRP, zinc coating and rubber lining.

Exhaust Systems

  •   OFfered Horizontal /vertical /ceiling suspended.
  •   Double/single skin/double decker.
  •   Capacity of 400 CFM to 50000 CFM.
  •   Static pressure range from 25 mm to 150 mm of Wg.
  •   Outer skin.of 6 MM thick GI plain Precoated.
  •   Panel thickness of 25 mm and 50 mm.
  •   Infill between panel-sandwich construction with CFC free PUF insulation.
  •   Frame work-Extruded aluminum profile with nylon fitting.s
  •   Base frame -GSS Frame.
  •   Coil- 4 / 6 / 8 / 2 row copper tube with aluminum fins.
  •   Drain-Aluminum/SS/GI
  •   Motor-ABB/semens make 3 phase motor.
  •   Fan-Forward and backward fan imported fan..
  •   Filters-50 MM thick pre filter and 300mm fine and HEPA filter.

Exhaust Hoods

  •   OFfered Horizontal /vertical /ceiling suspended.
  •   Double/single skin/double decker.
  •   Capacity of 400 CFM to 50000 CFM.
  •   Static pressure range from 25 mm to 150 mm of Wg.
  •   Outer skin.of 6 MM thick GI plain Precoated.
  •   Panel thickness of 25 mm and 50 mm.
  •   Infill between panel-sandwich construction with CFC free PUF insulation.
  •   Frame work-Extruded aluminum profile with nylon fitting.s
  •   Base frame -GSS Frame.
  •   Coil- 4 / 6 / 8 / 2 row copper tube with aluminum fins.
  •   Drain-Aluminum/SS/GI
  •   Motor-ABB/semens make 3 phase motor.
  •   Fan-Forward and backward fan imported fan..
  •   Filters-50 MM thick pre filter and 300mm fine and HEPA filter.

Other Projects